Shipping throughout Russia and to other countries

Stuffing boxes are used to seal joints in mechanisms operating in rotation mode, when the design features make it impossible to use stuffing boxes, cuffs or O-rings.
The sealing material is available in the form of twisted or braided elastic cords of round, square or rectangular cross-section made of asbestos-based thread.
Brands: AP, APR, CKD, LP, AS, AGI, AFT.


Tubes technical GOST5496-78: 1.2S(TMKSHS) D4.5MM X2, 1.2S(TMKSHS) D5MM X1.3, 1.2S(TMKSHS) D5MM X3, 1.2S(TMKSHS) D6.3MM X2, 1.2S(TMKSHS) D8MM X3, 1.2S(TMKSHS) D9MM X 1.5, 1.2S(TMKSCHS) D10MM X2, 1.2S(TMKSCHS) D10MM X3, 1.2S(TMKSCHS) D12MM X2, 4S(MBS) D10MM X2, 4S(MBS) D10MM X3, 4S(MBS) D12MM X2, 4S(MBS) D14MM X2, 4S(MBS) D16MM X3, 4S(MBS) D20MM X3, 4S(MBS) D24MM X3, 4S(MBS) D25MM X4, 4S(MBS) D6.3MM X2, 4S(MBS) D8MM X3, MEDICAL RUBBER TUBE TYPE 6 12X2,5MM

Gernite cord is an elastic material made from different combinations of elastomers and latexes. As a sealer, it is actively used during installation work in construction, industrial, housing and communal services and other areas. The material operating in a wide temperature range provides: thermal insulation, sound insulation, vibration protection.

Cords of round, as well as rectangular and square cross-sections (porous rubber profile) are manufactured according to GOST 6467-79, therefore they correspond to the following parameters: withstand pressure up to 1MPa, cross-section sizes vary from 2 to 63 mm.



Brochure

All RENTGEN products

The group "New Technologies" offers for review the products of the plant RENTGEN: rubber plates, bushings, rings, cuffs, sleeves and hoses, drive belts, bumpers, shock absorbers, fluoroplast, conveyor belt, reinforcement mesh retainers
  • Rubber plates RENTGEN
    Rubber plates
    MBS, TMKSH, etc.
  • Porous rubber RENTGEN
    Porous rubber
    SBR, SCR, CR, etc.
  • Rubber bushings  RENTGEN
    Rubber bushings
    To protect the cable, etc.
  • O-rings RENTGEN
    O-rings
    O-ring, etc.
  • Hoses and hoses RENTGEN
    Hoses and hoses
    MBS, PVC, PAR-1, etc.
  • Paronite and asbestos RENTGEN
    Paronite and asbestos
    STEP, SHAP, SHAON, PON, etc.
  • Rubber cuffs RENTGEN
    Rubber cuffs
    Collar, chevron, etc.
  • Drive belts RENTGEN
    Drive belts
    Wedge, toothed, etc.
  • Bumpers, shock absorbers RENTGEN
    Bumpers, shock absorbers
    Standard, etc.
  • Conveyor Belt RENTGEN
    Conveyor Belt
    Oil-resistant, frost-resistant, etc.
  • Nylon, polyamide, polyurethane RENTGEN
    Nylon, polyamide, polyurethane
    PA-6, etc.
  • Cords and gaskets RENTGEN
    Cords and gaskets
    Stuffing boxes, tubes, etc.
  • Seals, profiles RENTGEN
    Seals, profiles
    U-shaped, etc.
  • Silicone RENTGEN
    Silicone
    Form, non-form, etc.
  • Raw rubber RENTGEN
    Raw rubber
    7B-14, NO-68-1 NTA, etc.
  • Fluoroplast RENTGEN
    Fluoroplast
    Plates, rods, etc.
  • Reinforcement mesh retainers RENTGEN
    Reinforcement mesh retainers
    FST-2, FC, etc.

About RENTGEN

The X-RAY plant (St. Petersburg) is a leading manufacturer of plastic and rubber products in St. Petersburg and the North-Western region of Russia. The company occupies a leading position in its market niche due to the consistently high quality of products, an extensive assortment that meets modern requirements, and the strict fulfillment of contractual obligations.

Information Board RENTGEN

Learn more about our products RENTGEN.
  • Brochure X-RAY на сайте РЕНТГЕН
    Brochure X-RAY

NEW TECHNOLOGIES GROUP

For sales and support please contact