Hoses and hoses RENTGEN MBS, PVC, PAR-1, etc.

Oil-and-gasoline resistant rukva (MBS) are widely used in the oil, automotive, gas, fuel industry, national economy and other areas where liquids such as oil, fuel (gasoline, diesel fuel), lubricants, various types of fuels and lubricants flow through the hose.

• MBS. A brief description.

Polyvinyl chloride (PVC) hoses are used in manufacturing, science and medicine, in the food industry and in everyday life. Polyvinyl chloride is an inexpensive and at the same time technological polymer material, therefore PVC hose has a low cost.
To manufacture products with the required characteristics, various reinforcing materials, modern modifying and stabilizing additives and additives are used in production.

• PVC hoses. A brief description.

Steam hoses PAR-1 and PAR-2 are resistant to the maximum possible temperature loads, respectively, the wall thickness.
Operability of sleeves for steam:
max +143°C for sleeve type Par1
max +175°C for sleeve type Par2

• Sleeves for steam. A brief description.

Irrigation hoses and hoses are very common products for the national economy, motorists, summer residents, and other consumer groups.
Depending on the operating conditions (temperature, operating pressure), hoses can be reinforced, thick-walled, reinforced with synthetic thread or spiral.

• Watering sleeves. A brief description.

Pressure-suction hoses are designed for intake and injection of water from a natural or artificial water source, as well as intake of other liquids and gases (fuels, oils of petroleum origin, oxygen, etc.).
Types: PVC, B(gasoline) GOST5398, B(water), KSH (acid, alkali), Abrasive GOST18698 (W).

• Pressure-suction hoses. A brief description.

Pressure hoses and hoses: GOST18698 B (B)(D)(VG)
D=10, 12, 16, 18, 20, 25, 32, 38, 40, 50, 65, 75, 100, 125, 160 mm.

Rubber sleeves for gas welding: GOST9356 CLASS-1, CLASS-2, CLASS-3;
D=6, 9, 12, 16 mm.

High pressure hoses RVD: GOST6286

Brochure